Monday, August 31, 2015

VXLAN and GNS3!!!


This isn't going to be a super long blog post, but I just wanted to quickly add my recent videos :-).



Install CSR1000v into Virtualbox, and integrating with GNS3




And VXLAN in GNS3


Posted by at

13 comments:

  1. UnknownDecember 27, 2015 at 6:15 AM

    hello Jon,
    It's possible to get files of configuration of router ?
    i would like to do it
    Merry Chrismas
    Pascal

    ReplyDelete
    Replies
    1. Jon MajorDecember 27, 2015 at 11:39 PM

      I can probably do that :). I deleted the lab, but good practice for me to set it up again.

      Delete
    2. Jon MajorDecember 27, 2015 at 11:40 PM

      Oh, and Merry Christmas to you too!

      Delete
    3. UnknownJanuary 2, 2016 at 4:48 PM

      thanks Jon for Merry Chrismas
      Happy new year now ;)
      I made this simulation
      http://stayinginit.blogspot.fr/2014/02/vxlan-basics.html
      but i have a problem...
      he wrote : Yet another point of interest is that to configure VXLAN related commands your CSR1000V should have the premium license

      when i do :
      Router#show platform hardware throughput level
      The current throughput level is 100 kb/s
      Router#show license detail
      % Error: No licenses found

      do you think i can't test vxlan with evaluation csr1000V ?

      Delete
    4. Jon MajorJanuary 2, 2016 at 7:48 PM

      Evaluation lic should be just fine. I honestly don't recall even enabling it lol.

      Delete
    5. Jon MajorJanuary 6, 2016 at 12:07 PM

      Sorry for the delay, here's a zip file with some sample configs from another working vxlan lab.

      https://www.dropbox.com/sh/0ssfapj9wwrhlof/AACkD0YYk1XkstZeoW0B_rira?dl=0

      Delete
  2. UnknownJanuary 14, 2016 at 3:44 PM

    Thanks a lot Jon
    i 'll try to make simulation with gns3 :)

    ReplyDelete
  3. UnknownOctober 29, 2016 at 12:07 PM

    I Jon I'm using csr1000v-packages-universalk9.03.11.00.S.154-1.S-std in GNS3/Vbox but the vxlan commands aren't supported. Is there anything that has to be enabled first before starting the vxlan config? Thanks

    ReplyDelete
    Replies
    1. Jon MajorOctober 29, 2016 at 6:50 PM

      I don't believe VxLAN is supported until 3.12s. Looks like you just need a newer image, try going with Denali 16.3.1a or 3.16.4b.

      Delete
  4. UnknownOctober 30, 2016 at 3:03 PM

    Thanks for replying. Do you happen to have any of those images? Those images aren't under any of the contracts associated with my CCO.

    ReplyDelete
  5. RyanDecember 21, 2016 at 12:34 PM

    Anyone get VXLAN dot1q to work in GNS3 with the CSR1KV? I can do untagged traffic just fine.

    ReplyDelete
  6. Misfit for JesusJanuary 18, 2017 at 7:26 AM

    Any thoughts on a lab using BGP EVPN?

    ReplyDelete
    Replies
    1. Jon MajorJanuary 18, 2017 at 10:05 AM

      I had really good luck with BGP signaled VPLS, and there's so many commonalities between VXLAN and VPLS, so it's definitely crossed my mind. However, I've been so incredibly focused on Security these days I haven't had the chance to sit down and work it all out... yet.

      Delete

Subscribe to: Post Comments (Atom)